Witam
Zainstalowałem 14.04 na dysku twardym i mam problem z ciągle świecącą diodą dysku twardego. Program iotop nie pokazuje żadnego zużycia (czasem kworker, ale są to ułamki procenta). Czy to możliwe, że podczas instalacji obok windows 7 mogło coś być nie tak zainstalowane (początek-koniec dysku)?
Aspire E1-510 - Ciągle świecąca dioda dysku twardego
-
- Gibki Gibbon
- Posty: 3209
- Rejestracja: 30 wrz 2007, 13:49
- Płeć: Mężczyzna
Re: Aspire E1-510 - Ciągle świecąca dioda dysku twardego
Zainstaluj pakiet smartmontools i podaj wynik polecenia:
Podaj wynik polecenia:
Kod: Zaznacz cały
sudo smartctl -a /dev/sda
Kod: Zaznacz cały
df -BM
-
- Piegowaty Guziec
- Posty: 2
- Rejestracja: 11 gru 2014, 14:49
- Wersja Ubuntu: 14.04
- Środowisko graficzne: Unity
- Architektura: x86_64
Re: Aspire E1-510 - Ciągle świecąca dioda dysku twardego
Kod: Zaznacz cały
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10JPVX-22JC3T0
Serial Number: WD-WX71EA3PES15
LU WWN Device Id: 5 0014ee 6aed33f13
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Dec 12 14:14:42 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 210) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 181 180 021 Pre-fail Always - 1933
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 195
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 35
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 260
194 Temperature_Celsius 0x0022 108 107 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod: Zaznacz cały
System plików 1M-blocks użyte dostępne %uż. zamont. na
/dev/sda7 60756M 6253M 51395M 11% /
none 1M 0M 1M 0% /sys/fs/cgroup
udev 1946M 1M 1946M 1% /dev
tmpfs 392M 2M 391M 1% /run
none 5M 0M 5M 0% /run/lock
none 1956M 1M 1955M 1% /run/shm
none 100M 1M 100M 1% /run/user
/dev/sda8 303484M 285M 287761M 1% /home
Kto jest online
Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość