Kod: Zaznacz cały
[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 00:30:47 UTC 2007 (Ubuntu 2.6.20-16.28-generic)
[ 0.000000] Command line: root=UUID=3a84f825-f0b9-4d21-a550-b8a7ccc78d24 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fbb90
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x05000630 MSFT 0x00000097) @ 0x000000007ffc0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x05000630 MSFT 0x00000097) @ 0x000000007ffc0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x05000630 MSFT 0x00000097) @ 0x000000007ffc0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x05000630 MSFT 0x00000097) @ 0x000000007ffc0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x05000630 MSFT 0x00000097) @ 0x000000007ffce040
[ 0.000000] ACPI: DSDT (v001 A0427 A0427000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007ffc0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffc0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524224
[ 0.000000] On node 0 totalpages: 524127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1087 pages reserved
[ 0.000000] DMA zone: 2856 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513017 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515873
[ 0.000000] Kernel command line: root=UUID=3a84f825-f0b9-4d21-a550-b8a7ccc78d24 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 17.054080] Console: colour VGA+ 80x25
[ 17.055096] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 17.056599] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.057119] Checking aperture...
[ 17.057124] CPU 0: aperture @ 1a4000000 size 32 MB
[ 17.057126] Aperture too small (32 MB)
[ 17.064141] No AGP bridge found
[ 17.083404] Memory: 2052048k/2096896k available (2217k kernel code, 44460k reserved, 1162k data, 304k init)
[ 17.161481] Calibrating delay using timer specific routine.. 3218.01 BogoMIPS (lpj=6436021)
[ 17.161546] Security Framework v1.0.0 initialized
[ 17.161552] SELinux: Disabled at boot.
[ 17.161579] Mount-cache hash table entries: 256
[ 17.161732] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.161735] CPU: L2 Cache: 512K (64 bytes/line)
[ 17.161738] CPU 0/0 -> Node 0
[ 17.161741] CPU: Physical Processor ID: 0
[ 17.161742] CPU: Processor Core ID: 0
[ 17.162108] SMP alternatives: switching to UP code
[ 17.162386] Early unpacking initramfs... done
[ 17.593160] ACPI: Core revision 20060707
[ 17.593693] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 17.595523] ACPI Error (psloop-0196): Found unknown opcode FD at AML address ffffc2000001601b offset 5BB7, ignoring [20060707]
[ 17.595541] ACPI Error (psloop-0196): Found unknown opcode FD at AML address ffffc200000160ca offset 5C66, ignoring [20060707]
[ 17.597563] ACPI Error (psloop-0196): Found unknown opcode FD at AML address ffffc2000001601b offset 5BB7, ignoring [20060707]
[ 17.597582] ACPI Error (psloop-0196): Found unknown opcode FD at AML address ffffc200000160ca offset 5C66, ignoring [20060707]
[ 17.666811] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 17.847313] Using local APIC timer interrupts.
[ 17.909523] result 12557215
[ 17.909525] Detected 12.557 MHz APIC timer.
[ 17.913699] SMP alternatives: switching to SMP code
[ 17.913822] Booting processor 1/2 APIC 0x1
[ 17.924277] Initializing CPU#1
[ 18.001591] Calibrating delay using timer specific routine.. 3219.93 BogoMIPS (lpj=6439872)
[ 18.001598] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.001601] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.001604] CPU 1/1 -> Node 0
[ 18.001606] CPU: Physical Processor ID: 0
[ 18.001607] CPU: Processor Core ID: 1
[ 18.001700] AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[ 18.005614] CPU 1: Syncing TSC to CPU 0.
[ 18.005552] CPU 1: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 488 cycles)
[ 18.005563] Brought up 2 CPUs
[ 18.005681] Disabling vsyscall due to use of PM timer
[ 18.005684] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 18.005686] time.c: Detected 1607.330 MHz processor.
[ 18.831195] migration_cost=229
[ 18.831598] Time: 9:59:42 Date: 04/29/107
[ 18.831647] NET: Registered protocol family 16
[ 18.831743] ACPI: bus type pci registered
[ 18.831750] PCI: Using configuration type 1
[ 18.896570] ACPI: Interpreter enabled
[ 18.896573] ACPI: Using IOAPIC for interrupt routing
[ 18.897455] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.897460] PCI: Probing PCI hardware (bus 00)
[ 18.898611] Boot video device is 0000:02:00.0
[ 18.898893] PCI: Transparent bridge - 0000:00:10.0
[ 18.898946] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
[ 18.898949] Please report the result to linux-kernel to fix this permanently
[ 18.898988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.922846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 18.923603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 18.928282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 18.931221] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 18.931903] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 18.932572] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
[ 18.933251] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5
[ 18.933936] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 18.934610] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 18.935284] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 18.935959] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 18.936633] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 18.937318] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 18.938009] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 18.938684] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 18.939354] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 18.940028] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 18.940696] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 18.941389] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 18.942066] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled.
[ 18.942744] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 18.943525] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 18.943725] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.943737] pnp: PnP ACPI init
[ 18.948525] pnp: PnP ACPI: found 12 devices
[ 18.948610] PCI: Using ACPI for IRQ routing
[ 18.948613] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.948716] NET: Registered protocol family 8
[ 18.948718] NET: Registered protocol family 20
[ 18.950551] PCI: Bridge: 0000:00:03.0
[ 18.950554] IO window: c000-cfff
[ 18.950559] MEM window: dcf00000-dcffffff
[ 18.950561] PREFETCH window: disabled.
[ 18.950564] PCI: Bridge: 0000:00:04.0
[ 18.950567] IO window: d000-dfff
[ 18.950570] MEM window: dd000000-df6fffff
[ 18.950574] PREFETCH window: c0000000-cfffffff
[ 18.950584] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 18.950587] IO window: 0000e000-0000e0ff
[ 18.950591] IO window: 0000e400-0000e4ff
[ 18.950595] PREFETCH window: 88000000-8bffffff
[ 18.950600] MEM window: 8c000000-8fffffff
[ 18.950604] PCI: Bridge: 0000:00:10.0
[ 18.950607] IO window: e000-efff
[ 18.950611] MEM window: df700000-dfffffff
[ 18.950616] PREFETCH window: da000000-dbffffff
[ 18.950628] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.950634] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.950643] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 18.951239] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 18.951249] ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
[ 18.951358] NET: Registered protocol family 2
[ 18.993434] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.993808] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 18.995933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.996453] TCP: Hash tables configured (established 262144 bind 65536)
[ 18.996457] TCP reno registered
[ 19.005526] checking if image is initramfs... it is
[ 19.881241] Freeing initrd memory: 8183k freed
[ 19.886648] audit: initializing netlink socket (disabled)
[ 19.886666] audit(1180432782.636:1): initialized
[ 19.886912] VFS: Disk quotas dquot_6.5.1
[ 19.886939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 19.886999] io scheduler noop registered
[ 19.887001] io scheduler anticipatory registered
[ 19.887004] io scheduler deadline registered
[ 19.887022] io scheduler cfq registered (default)
[ 20.685266] 0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
[ 21.098951] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 21.098975] assign_interrupt_mode Found MSI capability
[ 21.098979] Allocate Port Service[0000:00:03.0:pcie00]
[ 21.099051] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 21.099075] assign_interrupt_mode Found MSI capability
[ 21.099078] Allocate Port Service[0000:00:04.0:pcie00]
[ 21.128461] Real Time Clock Driver v1.12ac
[ 21.128515] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.128519] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.129179] mice: PS/2 mouse device common for all mice
[ 21.129849] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.130109] input: Macintosh mouse button emulation as /class/input/input0
[ 21.130147] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.130152] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.130426] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.133150] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 21.134303] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.134309] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 21.134313] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 21.134316] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 21.134319] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 21.134513] TCP cubic registered
[ 21.134526] NET: Registered protocol family 1
[ 21.134658] ACPI: (supports S0 S1 S3 S4 S5)
[ 21.134726] Magic number: 7:568:981
[ 21.134739] hash matches device ttyc8
[ 21.134853] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.134928] Freeing unused kernel memory: 304k freed
[ 21.163201] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.361523] Capability LSM initialized
[ 22.379398] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email]dm-devel@redhat.com[/email]
[ 22.414587] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 22.419749] ACPI: Thermal Zone [TZ00] (33 C)
[ 22.492510] md: linear personality registered for level -1
[ 22.496101] md: multipath personality registered for level -4
[ 22.499675] md: raid0 personality registered for level 0
[ 22.503759] md: raid1 personality registered for level 1
[ 22.515228] raid5: automatically using best checksumming function: generic_sse
[ 22.533116] generic_sse: 4917.000 MB/sec
[ 22.533119] raid5: using function: generic_sse (4917.000 MB/sec)
[ 22.601118] raid6: int64x1 1461 MB/s
[ 22.669124] raid6: int64x2 1957 MB/s
[ 22.737122] raid6: int64x4 2041 MB/s
[ 22.805118] raid6: int64x8 1410 MB/s
[ 22.873110] raid6: sse2x1 2232 MB/s
[ 22.941091] raid6: sse2x2 2965 MB/s
[ 23.009097] raid6: sse2x4 3064 MB/s
[ 23.009100] raid6: using algorithm sse2x4 (3064 MB/s)
[ 23.009104] md: raid6 personality registered for level 6
[ 23.009107] md: raid5 personality registered for level 5
[ 23.009109] md: raid4 personality registered for level 4
[ 23.146294] usbcore: registered new interface driver usbfs
[ 23.146322] usbcore: registered new interface driver hub
[ 23.146351] usbcore: registered new device driver usb
[ 23.148146] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 23.148159] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 23.148176] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 23.148180] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 23.148317] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 23.148354] ehci_hcd 0000:00:0b.1: debug port 1
[ 23.148360] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 23.148373] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xdcebfc00
[ 23.148384] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.148489] usb usb1: configuration #1 chosen from 1 choice
[ 23.148521] hub 1-0:1.0: USB hub found
[ 23.148528] hub 1-0:1.0: 8 ports detected
[ 23.161636] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.184155] ieee1394: Initialized config rom entry `ip1394'
[ 23.217468] md: raid10 personality registered for level 10
[ 23.249344] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 23.250132] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 23.250146] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 23.250170] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 23.250364] eth0: RTL8168b/8111b at 0xffffc20000034000, 00:17:31:c9:1b:56, IRQ 18
[ 23.257019] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 23.257034] NFORCE-MCP51: chipset revision 161
[ 23.257037] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 23.257062] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 23.257073] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[ 23.257085] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[ 23.257094] Probing IDE interface ide0...
[ 23.673056] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 23.809605] usb 1-4: configuration #1 chosen from 1 choice
[ 23.997169] hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
[ 24.048975] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 24.182806] usb 1-5: configuration #1 chosen from 1 choice
[ 24.365090] usbcore: registered new interface driver libusual
[ 24.373675] SCSI subsystem initialized
[ 24.375570] Initializing USB Mass Storage driver...
[ 24.375674] scsi0 : SCSI emulation for USB Mass Storage devices
[ 24.375745] usbcore: registered new interface driver usb-storage
[ 24.375748] USB Mass Storage support registered.
[ 24.375890] usb-storage: device found at 3
[ 24.375892] usb-storage: waiting for device to settle before scanning
[ 24.670215] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.693964] Probing IDE interface ide1...
[ 24.981041] hdc: HTS541010G9AT00, ATA DISK drive
[ 25.653358] ide1 at 0x170-0x177,0x376 on irq 15
[ 25.671647] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[ 25.671665] ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 17 (level, low) -> IRQ 17
[ 25.672244] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 25.672257] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 25.672277] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 25.672281] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 25.672316] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 25.672338] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xdcebe000
[ 25.724182] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[df7ff000-df7ff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 25.728970] usb usb2: configuration #1 chosen from 1 choice
[ 25.729013] hub 2-0:1.0: USB hub found
[ 25.729026] hub 2-0:1.0: 8 ports detected
[ 25.840577] libata version 2.20 loaded.
[ 25.858732] hdc: max request size: 512KiB
[ 25.867015] hdc: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[ 25.867289] hdc: cache flushes supported
[ 25.867331] hdc:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 25.877166] Uniform CD-ROM driver Revision: 3.20
[ 25.883852] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 >
[ 26.132860] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 26.351164] usb 2-2: config 1 has an invalid interface number: 1 but max is 0
[ 26.351171] usb 2-2: config 1 has no interface number 0
[ 26.358249] usb 2-2: configuration #1 chosen from 1 choice
[ 26.360600] kjournald starting. Commit interval 5 seconds
[ 26.360563] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.668769] usb 2-7: new full speed USB device using ohci_hcd and address 3
[ 26.978157] usb 2-7: configuration #1 chosen from 1 choice
[ 26.982382] usbcore: registered new interface driver hiddev
[ 26.988164] input: PS/2+USB Mouse as /class/input/input2
[ 26.988187] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:0b.0-2
[ 26.988202] usbcore: registered new interface driver usbhid
[ 26.988206] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 27.004951] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800035c6b97]
[ 29.372782] usb-storage: device scan complete
[ 29.408203] scsi 0:0:0:0: Direct-Access WD 2500JB External 0107 PQ: 0 ANSI: 0
[ 37.975907] r8169: eth0: link up
[ 37.975914] r8169: eth0: link up
[ 39.396046] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 39.396087] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 39.433611] NET: Registered protocol family 17
[ 39.482045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.486713] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.733328] Yenta: CardBus bridge found at 0000:03:01.0 [1043:1367]
[ 39.839402] Bluetooth: Core ver 2.11
[ 39.839481] NET: Registered protocol family 31
[ 39.839484] Bluetooth: HCI device and connection manager initialized
[ 39.839488] Bluetooth: HCI socket layer initialized
[ 39.845691] input: PC Speaker as /class/input/input3
[ 39.864993] Yenta: ISA IRQ mask 0x0438, PCI irq 19
[ 39.864998] Socket status: 30000006
[ 39.865001] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 39.865008] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 39.865013] pcmcia: parent PCI bridge Memory window: 0xdf700000 - 0xdfffffff
[ 39.865016] pcmcia: parent PCI bridge Memory window: 0xda000000 - 0xdbffffff
[ 39.886340] ieee80211_crypt: registered algorithm 'NULL'
[ 39.911448] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 39.911472] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 39.926735] Bluetooth: HCI USB driver ver 2.9
[ 39.981407] usbcore: registered new interface driver hci_usb
[ 40.080761] bcm43xx driver
[ 40.080874] ACPI: PCI Interrupt 0000:03:03.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
[ 40.229173] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 40.232057] sda: Write Protect is off
[ 40.232060] sda: Mode Sense: 03 00 00 00
[ 40.232062] sda: assuming drive cache: write through
[ 40.234181] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 40.237052] sda: Write Protect is off
[ 40.237055] sda: Mode Sense: 03 00 00 00
[ 40.237057] sda: assuming drive cache: write through
[ 40.237062] sda:<6>sdhci: Secure Digital Host Controller Interface driver
[ 40.253199] sdhci: Copyright(c) Pierre Ossman
[ 40.253241] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[ 40.253975] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
[ 40.253988] ACPI: PCI Interrupt 0000:03:01.2[C] -> Link [LNKD] -> GSI 16 (level, low) -> IRQ 16
[ 40.254067] mmc0: SDHCI at 0xdf7ff800 irq 16 DMA
[ 40.263644] sda1
[ 40.263759] sd 0:0:0:0: Attached scsi disk sda
[ 40.295481] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 40.398599] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 40.437923] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 40.650919] nvidia: module license 'NVIDIA' taints kernel.
[ 40.907081] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 40.907094] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 40.907268] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007
[ 41.117501] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 41.117515] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 41.117543] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 41.307494] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[ 41.823488] lp: driver loaded but no devices found
[ 42.012813] Adding 2072344k swap on /dev/disk/by-uuid/f8787fe9-ebb6-4cca-bc06-5b8b47e6b65e. Priority:-1 extents:1 across:2072344k
[ 42.149948] EXT3 FS on hdc6, internal journal
[ 44.093813] NET: Registered protocol family 10
[ 44.093930] lo: Disabled Privacy Extensions
[ 44.401105] kjournald starting. Commit interval 5 seconds
[ 44.427499] EXT3 FS on dm-0, internal journal
[ 44.427506] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.453259] kjournald starting. Commit interval 5 seconds
[ 44.453570] EXT3 FS on dm-3, internal journal
[ 44.453575] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.455362] kjournald starting. Commit interval 5 seconds
[ 44.455650] EXT3 FS on dm-4, internal journal
[ 44.455655] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.608082] Adding 2072344k swap on /dev/disk/by-uuid/f8787fe9-ebb6-4cca-bc06-5b8b47e6b65e. Priority:-2 extents:1 across:2072344k
[ 48.430150] Asus Laptop ACPI Extras version 0.30
[ 48.430317] Error calling BSTS
[ 48.430322] unsupported model A6T, trying default values
[ 48.430324] send /proc/acpi/dsdt to the developers
[ 48.445799] ACPI: AC Adapter [AC0] (on-line)
[ 48.507739] ACPI: Battery Slot [BAT0] (battery present)
[ 48.524275] input: Power Button (FF) as /class/input/input5
[ 48.524308] ACPI: Power Button (FF) [PWRF]
[ 48.524365] input: Sleep Button (CM) as /class/input/input6
[ 48.524390] ACPI: Sleep Button (CM) [SLPB]
[ 48.524432] input: Lid Switch as /class/input/input7
[ 48.524448] ACPI: Lid Switch [LID]
[ 48.524486] input: Power Button (CM) as /class/input/input8
[ 48.524504] ACPI: Power Button (CM) [PWRB]
[ 48.611768] Using specific hotkey driver
[ 48.652766] No dock devices found.
[ 48.693153] ibm_acpi: ec object not found
[ 48.814459] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 48.854815] pcc_acpi: loading...
[ 54.378340] eth0: no IPv6 routers present
[ 56.021927] ppdev: user-space parallel port driver
[ 99.886259] Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).
[ 100.422484] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 100.436122] NFSD: starting 90-second grace period
[ 115.264841] Bluetooth: L2CAP ver 2.8
[ 115.264847] Bluetooth: L2CAP socket layer initialized
[ 115.268814] Bluetooth: RFCOMM socket layer initialized
[ 115.268834] Bluetooth: RFCOMM TTY layer initialized
[ 115.268837] Bluetooth: RFCOMM ver 1.8
[ 117.586446] usb 1-5:1.0: resuming
[ 117.586453] usb 1-5:1.0: PM: resume from 2, parent 1-5 still 2
[ 117.586458] usb 1-5:1.0: resuming
[ 117.586565] usb 2-7:1.2: resuming
[ 117.586568] usb 2-7:1.2: resuming
[ 3630.281515] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068306
[ 3638.283663] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068307
[ 3646.287792] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068308
[ 3654.286993] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068309
[ 3662.286065] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830a
[ 3670.285348] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830b
[ 3678.296270] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830c
[ 3686.302557] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830d
[ 3694.298436] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830e
[ 3702.299828] NVRM: Xid (0002:00): 16, Head 00000000 Count 0006830f
[ 3710.296684] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068310
[ 3718.303820] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068311
[ 3726.303013] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068312
[ 3734.304698] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068313
[ 3742.301382] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068314
[ 3750.300578] NVRM: Xid (0002:00): 16, Head 00000000 Count 00068315
[ 3841.978589] NETDEV WATCHDOG: eth0: transmit timed out
[ 4207.982304] NETDEV WATCHDOG: eth0: transmit timed out
[ 4513.973875] NETDEV WATCHDOG: eth0: transmit timed out
Sorry, nie wiem czy mozna wklejac duze fragmenty...
Edit: Zauwazylem, ze musi to miec jakis zwiazek z polaczeniem internetowym... Gdy w biurze probuje wyslac jakis dokument do lokalnej drukarki nie ma mozliwosci, by komp nie zawiesil sie... Jak moge to zbadac?