męczyłem się z zainstalowaniem sterownika od skanera...
Każdy poradnik pisze by, w /etc/udev.... bzdura.
W 9.04 robimy to tak:
1. Pobieramy sterownik brscan2 stąd http://solutions.brother.com/linux/sol/ ... html#model
2. instalujemy
Kod: Zaznacz cały
sudo dpkg -i brscan2-0.2.4-0.i386.deb
Kod: Zaznacz cały
sudo aptitude install xsane sane sane-utils
Kod: Zaznacz cały
qbsiu@qbsiu-laptop:~$ lsusb
Bus 002 Device 004: ID 04f9:01ce Brother Industries, Ltd DCP-135C
Kod: Zaznacz cały
qbsiu@qbsiu-laptop:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04f9, product=0x01ce) at libusb:002:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Kod: Zaznacz cały
qbsiu@qbsiu-laptop:~$ scanimage -L
device `brother2:bus5;dev1' is a Brother DCP-135C USB scanner
W poprzednich wersjach i wszędzie gdzie wygoglujecie, znajdziecie, że trzeba dodać/zmodyfikować linijkę w /etc/udev/rules.d/....
W przypadku 9.04 wygląda to tak, że edytujemy plik
Kod: Zaznacz cały
sudo gedit /lib/udev/rules.d/50-udev-default.rules
i mamy tam coś takiego:
Pod tym wszystkim wystarczy dopisać magiczną linijkę:# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664"
Pogrubione zamieniamy na własne numerki, te numerki znajdziemy w poleceniu lsusbSYSFS{idVendor}=="04f9", SYSFS{idProduct}=="01ce", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
Zapisujemy, dla pewności restartujemy system i już xsane powinien nam śmigać bez roota.Bus 002 Device 004: ID 04f9:01ce Brother Industries, Ltd DCP-135C
Jeżeli będą problemy także z drukarką, proszę pisać na pw.
Ogólnie sposób instalacji drukarki się nie zmienił, ale skanera - jak widać ops
P.s. jeżeli są jakieś nieprawidłowości - słać mi informację! Nie planuję wprowadzać użytkowników w błąd!!